TA CHENG HYDRAULIC MACHINE CO., LTD

Specifications
Graphic Symbols
Model nember designation
Characteristics

Model Mumbers	Max. Flow L/min (U.S.GPM)	Max Operating Pres. MPa(PSI)	Max. T-Line Back Pres. MPa(PSI)	Max. Changeover Frequency min (Cy cles /Min) MPa(PSI)	Approx. Mass kg(Ibs)
DSG-01-3C--50	63(16.6)	31.5(4570) Spool Type 60 Only 25(3630)	16(2320)	300 R Type Sol. Only 120	2.2
DSG-01-2D--50
DSG-01-2B--50					1.6

Graphic Symbols

Besides the use of the standard 2-position valves aforementioned in the :List of Standard Models and Maximum Flow" ,the 3-position valves also can be used as the 2-position valves using the two of their three positions. In this case, there are two kinds of the valve available. One is the valve using the neutral position and SOL a position (2B*A) and another is the valve using the neutral position and SOL b position(2B*B).

REVERSE MOUNTING OF SOLENOID
In spring offset type, it is a standard configuration that the solenoid is mounted onto the valve in the SOL b position(side). However, in this particular spool-spring arrangement, the mounting of the solenoid onto the valve in the reverse is as shown below. As for the valve type 2B*A and 2B*B, please refer to the explanatino under the heading of "Valve Using Neutral Position and Side Position" given below.

Series Mumber	Valve Size	NO. of Valve Position	Spool-Spring Arrangment	Spool Type	Special Two Position Valve	Coil Type	Electrical Conduit Connection	Design Number
DSG	-01	-2	B	2	A	-A220	-10	-50
Solenoid Operated Directional Valve	01	3:Three Positions 2:Two Positions	C:Spring Centered	2、3、4、9、10、11、12、40、60	- -	AC: A110, A220, A240 DC: D12, D24 AC→DC: R110, R220	10: Terminal Box Type 20: Plug-in Connector Type	50
			D:No-Spring	2	- -
			B:Spring Offset	2、3、8	A B

LIST OF STANDARD MODELS AND THE MAXIMUM FLOW

Models with AC Solenoids: DSG-01-***-A*

VALVES USING NEUTRAL POSITION AND SIDE POSITION

Models with DC or R Type Solenoids: DSG-01-***-D*/R*

PRODUCTS

DSG-01-50